Are you looking for Ford F150 bolt pattern? or just want to know about the Ford F150 lug pattern? We’ll explain everything you need to know about the Ford F150 Bolt Pattern.
There are two ways to find the bolt pattern of your Ford F150. You can either take the outside edge of one bolt and measure to the center of the opposite bolt.
Then you can multiply the diameter of that imaginary circle by the number of bolts. The result is the bolt pattern. Using these two measurements, you will find the bolt pattern of your car.
Ford F150 Wheel Bolt Pattern
When you want to install new wheels, you need to know the wheel bolt pattern for your Ford F150. Luckily, it is relatively simple to determine the correct size and bolt pattern for your rims. You can easily find out your bolt pattern by looking at the center of the bolt across from your stud. You can then add the number of bolts to get the diameter. The bolt pattern will determine the size of your tire.
The bolt pattern, center bore and lug nut size are all the same for every generation of Ford F-150 from 2004 to 2014. The only difference is the amount of force required to tighten the nuts, which is 150lb-ft (204Nm) for vehicles from 2004 to 2014 and M14x1.5 for those from 2015 and earlier.
Once you know the bolt pattern for your Tundra, you can start shopping for new wheels. Measure the distance between the outer edge of one bolt and the center of the opposing bolt. This will give you the overall diameter of the bolt pattern for your Tundra. Once you know the exact measurement, you can determine which type of wheels will fit your car.
The wheel bolt pattern for your Ford F150 is 6 X 135 mm. Choosing the correct wheel is important, as improper ones can cause premature tire wear, feathering, and cupping problems. It is recommended that you use OEM wheels when buying new wheels. Using aftermarket wheels can affect your car’s fuel consumption and speedometer readings and can lead to fines in some states.
It is important to note that you should also check the offset of your Ford F150 wheels. The offset is often printed on the mounting plate, the spoke back, or the back of the wheel. This offset is usually indicated by the letters ET.
Ford F150 Standard Tire and Rim Size
1. Ford F150 Model 2004 – 2008
- The standard tire size for the Ford F150 4.2 V6 or 4.6 V8 is 235/75R17, 235/70R17, 255/65R17 or 255/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 4.6 HD V8 or 5.4 HD V8 is LT245/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 5.4 V8 is 265/60R18 or 275/65R18 and the standard rim size is 7.5Jx18 ET44.
2. Ford F150 Model 2009 – 2010
- The standard tire size for the Ford F150 4.6 V8 is 255/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 4.6 HD V8, 5.4 HD V8 or 5.4i HD V8 is LT245/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 5.4 V8 or 5.4i V8 is 265/60R18 and the standard rim size is 7.5Jx18 ET44.
3. Ford F150 Model 2011 – 2014
- The standard tire size for the Ford F150 3.5 V6 , 3.7 V6 or 5.0 V8 is 255/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 3.5 HD V6, 5.0 HD V8 or 6.2 HD V8 is LT245/70R17 and the standard rim size is 7.5Jx17 ET44.
- The standard tire size for the Ford F150 6.2 V8 is LT315/70R17 and the standard rim size is 8.5Jx17 ET34.
4. Ford F150 Model 2015 – 2017
- The standard tire size for the Ford F150 2.7GTDi V6, 3.5Ti V6, 3.5GTDi V6 or 5.0Ti V8 is 245/70R17 or 265/70R17 and the standard rim size is 7.5Jx17 ET44.
5. Ford F150 Model 2018 – 2020
- The standard tire size for the Ford F150 2.7GTDi V6, 3.0TD V6, 3.3Ti V6, 3.5GTDi V6 or 5.0Ti V8 is 245/70R17 or 265/70R17 and the standard rim size is 7.5Jx17 ET44 or 7.5Jx17 ET44.
- The standard tire size for the Ford F150 3.5GTDi V6 is LT315/70R17 and the standard rim size is 8.5Jx17 ET34.
6. Ford F150 Model 2020 – 2022
- The standard tire size for the Ford F150 2.7 EcoBoost V6 or 3.3Ti V6 is 245/70R17, 265/70R17, 265/60R18 or 275/65R18 and the standard rim size is 7.5Jx17 ET44, 7.5Jx17 ET44, 7.5Jx18 ET34 or 7.5Jx18 ET44.
- The standard tire size for the Ford F150 3.0TD V6 or 5.0Ti V8 is 245/70R17, 265/70R17, 265/60R18, 275/65R18 or 275/60R20 and the standard rim size is 7.5Jx17 ET44, 7.5Jx17 ET44, 7.5Jx18 ET34, 7.5Jx18 ET44 or 8.5Jx20 ET44.
- The standard tire size for the Ford F150 3.5 EcoBoost V6 or 3.5 PowerBoost V6 is 245/70R17, 265/70R17, 265/60R18, 275/65R18, 275/60R20 or 275/50R22 and the standard rim size is 7.5Jx17 ET44, 7.5Jx17 ET44, 7.5Jx18 ET34, 7.5Jx18 ET44, 8.5Jx20 ET44 or 9Jx22 ET44.
Read Also: How to Find the Bolt Pattern of Your Dodge Charger
Ford F150 Bolt Pattern and Rim Width
The rim width of your Ford F150 is an important factor when choosing your tires. It will determine the size of your tires, as a narrow rim will make your tires narrower. However, be careful when choosing the correct rims, as the rim width can change during fitment. Also, the quality of the rims you choose may affect the width of your tires, as high-quality tires can stretch as much as 5 mm.
When choosing the right rims for your Ford F150, you should also consider the bolt pattern of the wheels. This bolt pattern is 6 X 135mm. If the bolt pattern is wrong, you might end up with premature tire wear, cupping, or feathering.
To prevent these problems, you should check the bolt pattern monthly. If you find that the bolts have become loose, it is time to replace the tires. Ideally, you should replace your tires every 30,000 to 50,000 miles.
Another important factor to consider is the center bore. The center bore is the diameter of the hole where the hub and rim meet. If the center bores are different, you might not be able to get a proper fit. If this is the case, you should make sure you select a wheel with the same center bore size. Otherwise, your wheels might lose grip when you turn corners.
In addition to the lug diameter, rim width is another important factor to consider. If you don’t know the bolt diameter, you might consider using an adapter. Adapters allow you to change the lug pattern.
Ford F150 Bolt Pattern and The Tire Size
When replacing your wheels and tires, you need to know the tire size that fits your Ford F150’s bolt pattern. This information can be found in your car’s owner’s manual. Also, you should look at the offset of your current wheels to find the right offset for your car.
When choosing the correct tire size for your Ford F150, you should consider the driving conditions and weather. Many drivers in four-season states purchase two sets of tires to maximize their performance and safety. Other drivers prefer all-season tires for convenience. No matter what type of driving you do, you will want to ensure that your Ford F150 is properly protected.
Your Charger’s rim width can also affect the tire size. A wide rim will require a wider tire, while a narrow rim will require a narrower one. Moreover, the rim width may change during the fitment process. In addition, the width of your tire will vary depending on the quality of the tire. High-quality tires can stretch as much as 5mm.